MICROSCOPE
CENTRIFUGE
$0
Centrifuge 6 Tubes (Model-C856)
Includes Linear Variable Speed and 30 minute Timer C856H shown with the optional TubeHoldsterTM is proud to introduce the most powerful centrifuge in its class. PowerSpinTM LX spins at 4,000 rpm. The benefit of this increased speed is a cleaner, more complete separation of cellular componentsthus yielding a superior serum or plasma specimen. The Power SpinTM series centrifuges are extremely quiet for a better working environment. All PowerSpin models have a timer and on/off switch as well as other features that are normally only found on units costing much more.
$398
Centrifuge 8 Tubes (Model-C858)
Micro-Hematoclit 24 Tubes (Model-C-MH30)
Is made of formed metal and has a baked paint application that is acid and reagent resistant. A safety switch built into the handle assembly disconnects the power to the motor whenever the latch is lifted. The hematocrit tray is made of plastic composite material backed by an aluminum shell for durability and lighter weight. The brushed motor is mounted on rubber mounts to provide quieter running and less vibration. cleaned and disinfected. Features • Twenty-four (24) place rotor with replaceable rubber ring and screw down metal lid • Nominal speed is 11,500 RPM • Dependable mechanical 15-minute timer with bell signal at end of run • Air-cooled, brush type AC motor • All metal housing for years of dependable use • Safety switch in latch shuts off motor when lid is lifted • Electric motor braking • Indicator light tells when unit is in use
$1595
Centrifuge 24 Tubes (Model-C8624)
PowerSpin C8624, 24 place variable speed centrifuge is specially designed for years of demanding laboratory work. It is easy to read, user friendly, and aids against human error. Each of the PowerSpin Series centrifuges runs extremely quite. The rubber shock absorbing suction cup feet hold the unit in place resulting in a quieter run with less vibration. All PowerSpin models have a timer and on/off switch as well as other features that are normally only found on units costing much more Features • Twenty-four (24) place rotor for 2~15 ml tubes • Push button panel for convenience when wearing gloves • Spins 1000 to 3400 RPM • Quite running (50 decibels at 3400 RPM) • Rotor chamber is accessible for easy cleaning • Easy to read digital display • Remembers last setting for quick and easy repeating testing • Suction cup feet • Compact design for most efficient use of space • 60 minute digital timer • On/off switch located in rear of the unit • Detachable power cord • Easy clean exterior • Lid window for speed verification with strobe tachometer • Zero RPM Safety Latching System to secure lid from being opened while rotor is spinning • Indicator light signals when the power is on • Standard 115 V/60 Hz AC; Also available in 220V
8 Place Tube Rocker (Model-LTTR100)
Tube Rocker is one of the most utilized tools for the laboratory. L-TTR100 is a heavy duty, almost silent mixer designed for years of everyday use. It has a capacity of 8 tubes or mix of tubes and vials with a speed of 25 rocking cycles per minute.The tube pad is reversible and autoclavable.
$295
Multi-Mixing Rocker (Model-MTR22)
MTR22 Multi-Mix has the capability to perform three modes of mixing, all of which are programmable and can all be used in the same "run". Or, if you just want to rotationally mix, set the unit to rotate. It is very simple to operate and program, runs can be programmed in seconds. You can mix many different sizes of tubes ranging from 1.5 ml to 50 ml with the two interchangeable mixing platforms that come standard with the unit. Tubes are held in-place with unique rubber flexible grippers; that surround and firmly hold tubes of varying diameters. The MTR22 can mix in the following motions: 1. Rotate 360°, forward or reverse, and forward, then reverse 2. Reciprocating Rocker, back and forth like a traditional rocker 3. Vortex, (cavitate) Tube Capacity, Two Platforms: Platform 1: 22 Tubes: 1.5 ml - 15 ml (Installed) Platform 2: Six, 50 ml Tubes and Two 1.5 - 15 ml Tubes (Included) Features • RPM: Variable from 5 – 30 RPM • Timer: Up to 999 Seconds, max mixing time: 12 hours • Reciprocating Timer: Up to 999 Seconds • Rotation Angle in Reciprocation Mode: 15° - 90° (in 15° increments) • Turning angle vortex mode: 1 to 5 • Vortexing times: 1 to 5 • Maximum timer: 12 hours • Power: 110 / 220 V Size 13.5 in x 7 in x 7.5 in (342 x177 x 192 mm) Weight 6.7 lbs (3 kg)
$598
15 Place Tube Rocker (Model-L-TTR200)
The RED "PAUSE" button available exclusively on all UNI tube mixers. This red top-mounted button allows you to quickly pause mixing while you add or remove tubes. This handy feature extends the life of your rocker as you no longer grind gears while removing tubes. Newly redesign side panels add stability to the unit while retaining the smal footprint on your benchtop. Heavy duty and silent mixer 15 tube Capacity 25 rocking cycles per minute speed Reversible and autoclavable pad Size 13.7 in x 4.7 in x 5.0 in (347 x 119 x 126 mm) Shipping Size 15.7 in x 6.7 in x 6.9 in (400 x 170 x 175 mm) Weight 4.8 lbs (2.2 kg) Shipping Weight 5.8 lbs (2.6 kg)
$365
30 Double Tube Rocker (Model-LTTR200D)
The new model L-TTR200D London Bus™, Double Decker Tube Rocker has a capacity of 30 tubes on two, 15 tube shelves; and is an almost silent heavy-duty unit designed for years of everyday use. Available in both 110V and 220V versions. With this unit you can prep samples for diff counts, CBC’s, mix injectables, or even prep analyzer controls. Capacity of 30 tubes or mix of tubes and vials (two 15 tube shelves) 25 gentle rocking cycles per minute Non-slip reversible and autoclavable tube pad(s) On/Off switch Will handle tubes up to 120 mm in length (up to 15 ml tubes) One year limited warranty Size and Weight Size 13.7 in x 4.7 in x 7.5 in Weight 5.2 lbs
$449
©San Diego Orthopedics. All Rights Reserved.
Need Help? Mail us sdortho_aol.com
Call Us -619-422-1788
